Use on new wood that is bare, stained, milk-painted or to revive old wood finishes. It penetrates to protect from the inside out and does not leave a surface film that will chip or scratch.
This food-safe oil finish is perfect for use in the kitchen on wood or stone. Used outside, it can restore the luster of old oil based paint or revitalize surfaces such as cast iron. Test on an inconspicuous spot prior to using on an entire piece.
How to use this product:
Surface must be clean and dry.
Apply small amount of oil to surface using a clean cloth. Rub gently until it is absorbed into raw wood or Milk Paint finish.
For additional sheen and protection, add 2-4 coats.
With no solvents, drying time is extended, so allow 2 hours between coats and wipe away excess after 12 hours. Finished piece may take several days to cure.
To maintain, apply a light coat every other year as needed. To remove scrates, lightly sand blemish, then reapply oil.
Smaller size (250ml/1 cup) covers approximately 25-40 sq. feet, medium size (1 pint) covers twice that amount. Need a larger size? Hemp Oil can be purchased by the gallon through special order. Soap and water cleanup.
For additional tips and video tutorials on using this product visit www.missmustardseedmilkpaint.com